The EMC D-PM-MN-23 Questions & Practice Test are Available On-Demand
Valid D-PM-MN-23 Exam Dumps Ensure you a HIGH SCORE
NEW QUESTION # 37
Regarding hardware components, which of the following is true for both PowerMax 2500 and 8500?
(Choose two)
- A. They both use NVMe SSDs exclusively
- B. They share the same physical chassis design
- C. Both support flexible front-end connectivity options
- D. Both models have identical CPU configurations
Answer: A,C
NEW QUESTION # 38
What are the key differences between PowerMax 2500 and 8500 in terms of system connectivity?
(Choose two)
- A. PowerMax 2500 supports NVMe over Fibre Channel only, while 8500 supports both NVMe over Fibre Channel and Ethernet
- B. PowerMax 2500 and 8500 both support NVMe over Fabric
- C. PowerMax 2500 supports fewer host ports compared to 8500
- D. PowerMax 8500 supports legacy SCSI connectivity, whereas 2500 does not
Answer: B,C
NEW QUESTION # 39
How do the Simplified Symmwin tool and Dell EMC Unisphere complement each other in PowerMax maintenance? (Choose two)
- A. Both provide remote access to the system
- B. Both are interchangeable for all maintenance tasks
- C. Simplified Symmwin is used for hardware-related tasks, while Unisphere is for software and configuration management
- D. Simplified Symmwin is mainly for performance monitoring, while Unisphere handles hardware tasks
Answer: A,C
NEW QUESTION # 40
What are the storage capacities of PowerMax 2000 and 8000 models, respectively?
- A. 2 PB and 8 PB
- B. 1 PB and 4 PB
- C. 2.5 PB and 10 PB
- D. 1.5 PB and 5 PB
Answer: A
NEW QUESTION # 41
In terms of bay configurations, how does the PowerMax 2500 differ from the 8500 model?
- A. The PowerMax 2500 has fewer engine options than the 8500
- B. There is no difference in bay configurations between the two models
- C. The PowerMax 2500 has more drive bay options
- D. The PowerMax 8500 supports larger drive bays
Answer: A
NEW QUESTION # 42
Refer to the exhibit.
What does "DRIVE-A:1" represent?
- A. Drive type and spare drive location
- B. Physical location of the drive in the bay
- C. Physical location of the drive in the DAE
- D. Drive type and number
Answer: C
NEW QUESTION # 43
In terms of system reliability, how does PowerMax 8500 compare to PowerMax 2500?
- A. Similar fault tolerance
- B. Fault tolerance dependent on configuration
- C. Similar fault tolerance
- D. Higher fault tolerance
Answer: D
NEW QUESTION # 44
Which two methods can verify the position and cabling of a part that must be replaced? (Select 2)
- A. In the Tools menu by selecting Site info.
- B. In the scripts menu by selecting System Management.
- C. In the Tools menu by selecting Animations.
- D. In the Tools menu by selecting Cable Diagrams
- E. In the Tools menu by selecting Inlines.
Answer: A,D
NEW QUESTION # 45
A PowerMax array with eNAS experiences a failure of an I/O module that is configured to a Data Mover (DM).
Which program is used to fail the DM over to the standby DM before replacing the I/O module?
- A. Symmwin
- B. Unisphere for PowerMaxb
- C. Unisphere for VNX
- D. Simplified Symmwin
Answer: C
NEW QUESTION # 46
Which two front-end emulations are available for PowerMax 8000 arrays?
(Select 2)
- A. DX
- B. FA
- C. DN
- D. SE
Answer: A,B
NEW QUESTION # 47
How do PowerMax 2000 and 8000 models differ in terms of local RAID options?
- A. PowerMax 8000 supports only RAID 5 and 6
- B. PowerMax 8000 offers more flexible RAID configurations
- C. PowerMax 8000 offers more flexible RAID configurations
- D. They offer the same RAID options
Answer: B
NEW QUESTION # 48
Which default PowerMax subnet IP address is used for remote access?
- A. 172.15.0.0/24
- B. 192.168.176.0/16
- C. 172.17.0.0/16
- D. 192.168.176.0/24
Answer: C
NEW QUESTION # 49
How do the PowerMax 2000 and 8000 models primarily differ?
- A. In their physical dimensions
- B. In their connectivity options
- C. In their maximum storage capacity
- D. In their software capabilities
Answer: C
NEW QUESTION # 50
What state is the battery in when the Li-Ion SPS battery position indicator is yellow?
- A. Parked
- B. Connected
- C. Engaged
- D. Off
Answer: A
NEW QUESTION # 51
How do PowerMax 8500's connectivity options enhance data center integration?
- A. Wireless connectivity options
- B. Standard Ethernet connections
- C. Wireless connectivity options
- D. High-speed Fibre Channel connections
- E. Legacy SCSI connections
Answer: D
NEW QUESTION # 52
How does the Control Station (CS) App facilitate PowerMax 2500 and 8500 maintenance? (Choose two)
- A. By automating all maintenance tasks
- B. By enabling direct physical access to the arrays
- C. Through guided troubleshooting procedures
- D. By providing remote monitoring capabilities
Answer: C,D
NEW QUESTION # 53
PowerMaxOS 10 offers which of the following benefits over previous versions? (Choose two)
- A. Support for only traditional spinning disks
- B. Enhanced end-to-end NVMe
- C. Lower total cost of ownership
- D. Decreased scalability options
Answer: B,C
NEW QUESTION # 54
Which method can be used to remotely connect to a PowerMax 2500 or 8500 Control Stations?
- A. EMCRemote
- B. SSH cmd shell
- C. CS SSH Tunnel Manager
Answer: C
NEW QUESTION # 55
What makes PowerMax 2500 a suitable choice for growing businesses?
- A. High initial investment cost
- B. Scalability
- C. Limited connectivity options
- D. Fixed storage capacity
Answer: B
NEW QUESTION # 56
What is the primary purpose of the Simplified Symmwin tool in PowerMax maintenance?
- A. For remote system monitoring
- B. To manage network configurations
- C. For regular software updates
- D. To facilitate FRU replacement procedures
Answer: D
NEW QUESTION # 57
Which model is more suitable for environments with high scalability and performance needs?
- A. PowerMax 2500
- B. PowerMax 8000
- C. PowerMax 8500
- D. PowerMax 2000
Answer: B
NEW QUESTION # 58
Which serial number identifier is used for the PowerMax 8000 array?
- A. X976
- B. X978
- C. X977
- D. X979
Answer: A
NEW QUESTION # 59
Which slots are reserved for Flash modules in PowerMax 2000 and 8000 single engine arrays?
- A. PowerMax 2000: Slots 0 and 1
PowerMax 8000: Slots 0, 1, 9, and 10 - B. PowerMax 2000: Slots 0 and 6
PowerMax 8000: Slots 0, 1, 9, and 10 - C. PowerMax 2000: Slots 0 and 6
PowerMax 8000: Slots 0, 1, 6, and 7 - D. PowerMax 2000: Slots 0 and 1
PowerMax 8000: Slots 0, 1, 6, and 7
Answer: C
NEW QUESTION # 60
Which RAID level in PowerMaxOS 10 requires the logical capacity of one spare disk per disk group for a system regardless of the drive count?
- A. RAID 1
- B. RAID 6
- C. RAID 5
Answer: B
NEW QUESTION # 61
......
D-PM-MN-23 Exam Practice Questions prepared by EMC Professionals: https://prep4sure.dumpstests.com/D-PM-MN-23-latest-test-dumps.html